From: Svjatoslav Agejenko Date: Sun, 29 Mar 2020 09:23:24 +0000 (+0300) Subject: Added shelf and roll X-Git-Url: http://www2.svjatoslav.eu/gitweb/?p=physical.git;a=commitdiff_plain;h=f57f37401771e317c928ac5ae8fb944121541e6b;ds=sidebyside Added shelf and roll --- diff --git a/RF/Yagi antenna connector/Yagi.org b/RF/Yagi antenna connector/Yagi.org deleted file mode 100644 index 7ea8ecf..0000000 --- a/RF/Yagi antenna connector/Yagi.org +++ /dev/null @@ -1,3 +0,0 @@ - -https://www.qsl.net/dk7zb/start1.htm -see: The 2+3-Element Duoband-Yagi diff --git a/RF/Yagi antenna connector/index.html b/RF/Yagi antenna connector/index.html new file mode 100644 index 0000000..ce0b587 --- /dev/null +++ b/RF/Yagi antenna connector/index.html @@ -0,0 +1,303 @@ + + + +DIY Yagi antenna camera tripod connector + + + + + + + + + + + + + +
+

DIY Yagi antenna camera tripod connector

+ +
+

1 General

+
+ +
+
+ +
+

2 Project description

+
+ +
+

make.png +

+
+ +

+Martin Steyer (DK7ZB) designed nice Duoband Yagi for 2m/70cm. I needed +device to mount this DIY antenna to typical camera tripod. +

+ + +
+

make,%20closeup.png +

+
+ +

+Therefore adapter is designed. From bottom it emulates camera and has +holes for tripod: +

+ + +
+

bottom.png +

+
+ +

+From side, it has hole for construction pipe, used in this Yagi: +

+ + +
+

side.png +

+
+ +

+Download: +

+ +
+
+
+
+ + + diff --git a/RF/Yagi antenna connector/index.org b/RF/Yagi antenna connector/index.org new file mode 100644 index 0000000..2fae4d2 --- /dev/null +++ b/RF/Yagi antenna connector/index.org @@ -0,0 +1,51 @@ +#+TITLE: DIY Yagi antenna camera tripod connector +#+AUTHOR: Svjatoslav Agejenko +#+LANGUAGE: en + +* (document settings) :noexport: +** use dark style for TWBS-HTML exporter +#+HTML_HEAD: +#+HTML_HEAD: +#+HTML_HEAD: +#+HTML_HEAD: + +* General ++ DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE + COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE + DESIGNS AT YOUR OWN RISK. + ++ This design is released under Creative Commons Zero (CC0) license. + ++ Author: + - Svjatoslav Agejenko + - Homepage: https://svjatoslav.eu + - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +* Project description + +[[file:make.png]] + +Martin Steyer (DK7ZB) designed nice [[https://www.qsl.net/dk7zb/Duoband/duoband_2-70_2-3.htm][Duoband Yagi for 2m/70cm]]. I needed +device to mount this DIY antenna to typical camera tripod. + +[[file:make,%20closeup.png]] + +Therefore adapter is designed. From bottom it emulates camera and has +holes for tripod: + +[[file:bottom.png]] + +From side, it has hole for construction pipe, used in this Yagi: + +[[file:side.png]] + +Download: +- [[file:Yagi%20antenna%20connector.stl][Printable STL file]] +- [[file:Yagi%20antenna%20connector.FCStd][Editable FreeCAD file]] diff --git a/RF/Yagi antenna connector/make, closeup.png b/RF/Yagi antenna connector/make, closeup.png new file mode 100644 index 0000000..658764e Binary files /dev/null and b/RF/Yagi antenna connector/make, closeup.png differ diff --git a/RF/Yagi antenna connector/make.png b/RF/Yagi antenna connector/make.png new file mode 100644 index 0000000..18fda4f Binary files /dev/null and b/RF/Yagi antenna connector/make.png differ diff --git a/RF/Yagi antenna connector/result, closeup.png b/RF/Yagi antenna connector/result, closeup.png deleted file mode 100644 index 658764e..0000000 Binary files a/RF/Yagi antenna connector/result, closeup.png and /dev/null differ diff --git a/RF/Yagi antenna connector/result.png b/RF/Yagi antenna connector/result.png deleted file mode 100644 index 18fda4f..0000000 Binary files a/RF/Yagi antenna connector/result.png and /dev/null differ diff --git a/index.html b/index.html index 5e0fe26..2a0f1ea 100644 --- a/index.html +++ b/index.html @@ -2,7 +2,7 @@ Physical projects - + @@ -293,12 +293,33 @@ git clone https://www2.svjatoslav.eu/git/physical.git +
  • Fujifilm camera battery (Newell NP-W126) box + +
    • +
  • Fujifilm X-mount to microscope adapter
    • + +
  • Case for 52mm macro filter + +
    • + +
  • Case for microscope slides and cover slips + +
    • @@ -307,44 +328,51 @@ git clone https://www2.svjatoslav.eu/git/physical.git

    2.3 Organizers / boxes / covers

    +
    + -
  • NanoVNA case +
    +

    2.4 Radio

    +
    • @@ -373,7 +402,7 @@ git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/index.org b/index.org index 76d7acb..a57e9b5 100644 --- a/index.org +++ b/index.org @@ -53,24 +53,34 @@ Collection of physical projects. Electronics, 3D designs etc.. + [[file:optics/35mm%20film%20copying%20device/index.html][35mm film copying device]] + [[file:optics/35mm%20film%20copying%20device/make.png]] ++ [[file:optics/Fujifilm%20camera%20battery%20box/index.html][Fujifilm camera battery (Newell NP-W126) box]] + + [[file:optics/Fujifilm%20camera%20battery%20box/make.png]] + + [[file:optics/Fujifilm%20X-mount%20microscope%20adapter/index.html][Fujifilm X-mount to microscope adapter]] + [[file:optics/Fujifilm%20X-mount%20microscope%20adapter/make.png]] -** Organizers / boxes / covers -+ [[file:organizers/Fujifilm%20camera%20battery%20box/index.html][Fujifilm camera battery (Newell NP-W126) box]] - + [[file:organizers/Fujifilm%20camera%20battery%20box/make.png]] ++ [[file:optics/macro%20filter%20storage%20compartment/index.html][Case for 52mm macro filter]] + + [[file:optics/macro%20filter%20storage%20compartment/make.png]] -+ [[file:organizers/macro%20filter%20storage%20compartment/index.html][Case for 52mm macro filter]] - + [[file:organizers/macro%20filter%20storage%20compartment/make.png]] ++ [[file:optics/microscope%20slide%20box/index.html][Case for microscope slides and cover slips]] + + [[file:optics/microscope%20slide%20box/make.png]] -+ [[file:organizers/microscope%20slide%20box/index.html][Case for microscope slides and cover slips]] - + [[file:organizers/microscope%20slide%20box/make.png]] +** Organizers / boxes / covers ++ [[file:organizers/cable%20organizer/index.html][Cable organizer]] + + [[file:organizers/cable%20organizer/make.png]] + [[file:organizers/digital%20calipers%20mod%20and%20box/index.html][Digital caliphers battery mod and storage box]] + [[file:organizers/digital%20calipers%20mod%20and%20box/make.png]] -+ [[file:organizers/NanoVNA%20case/index.html][NanoVNA case]] - + [[file:organizers/NanoVNA%20case/make,%202.png]] ++ [[file:organizers/roll/index.html][Wire rolls]] + + [[file:organizers/roll/make.png]] -+ [[file:organizers/cable%20organizer/index.html][Cable organizer]] - + [[file:organizers/cable%20organizer/make.png]] ++ [[file:organizers/shelf/index.html][Wall shelf]] + + [[file:organizers/shelf/make.png]] + +** Radio ++ [[file:RF/NanoVNA%20case/index.html][NanoVNA case]] + + [[file:RF/NanoVNA%20case/make,%202.png]] + ++ [[file:RF/Yagi%20antenna%20connector/index.html][DIY Yagi antenna connector]] + + [[file:RF/Yagi%20antenna%20connector/make.png]] diff --git a/organizers/roll/index.html b/organizers/roll/index.html new file mode 100644 index 0000000..eb60385 --- /dev/null +++ b/organizers/roll/index.html @@ -0,0 +1,343 @@ + + + +27mm and 55mm rolls + + + + + + + + + + + + + +
    +

    27mm and 55mm rolls

    + +
    +

    1 General

    +
    + +
    +
    + +
    +

    2 Project description

    +
    + +
    +

    make.png +

    +
    + +

    +I am a big fan of stackable bins organizer. I find 2x2 bins with 21mm +height are particularly good for storing rolls of wire. Also electric +handheld screwdriver is good for twisting wire onto the +roll. Therefore I designed rolls that have standard hexagonal hole on +the bottom (for screwdriver compatibility): +

    + + +
    +

    roll%2027mm,%20body,%202.png +

    +
    + +

    +and 20mm total roll height, to be used with stackable bins +organizer. Rolls are mode from body and cover: +

    + +
      +
    • Body: +
        +
      • roll%2027mm,%20body.png +
        • +
      +
      • + +
    • Cover: +
        +
      • roll%2027mm,%20cover.png +
        • +
      +
      • +
    + +

    +After printing, both parts have to be glued together. This is to avoid +overhangs that are hard to print. +

    +
    +
    + +
    +

    3 27mm diameter roll

    +
    + +
    +

    roll%2027mm,%20assembled.png +

    +
    + + +
    +
    + +
    +

    4 55mm diameter roll

    +
    + +
    +

    roll%2055mm,%20assembled.png +

    +
    + + +
    +
    +
    +
    + + + diff --git a/organizers/roll/index.org b/organizers/roll/index.org new file mode 100644 index 0000000..74be2c5 --- /dev/null +++ b/organizers/roll/index.org @@ -0,0 +1,68 @@ +#+TITLE: 27mm and 55mm rolls +#+AUTHOR: Svjatoslav Agejenko +#+LANGUAGE: en + +* (document settings) :noexport: +** use dark style for TWBS-HTML exporter +#+HTML_HEAD: +#+HTML_HEAD: +#+HTML_HEAD: +#+HTML_HEAD: + +* General ++ DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE + COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE + DESIGNS AT YOUR OWN RISK. + ++ This design is released under Creative Commons Zero (CC0) license. + ++ Author: + - Svjatoslav Agejenko + - Homepage: https://svjatoslav.eu + - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +* Project description +[[file:make.png]] + +I am a big fan of [[https://www.thingiverse.com/thing:2471753][stackable bins organizer]]. I find 2x2 bins with 21mm +height are particularly good for storing rolls of wire. Also electric +handheld screwdriver is good for twisting wire onto the +roll. Therefore I designed rolls that have standard hexagonal hole on +the bottom (for screwdriver compatibility): + +[[file:roll%2027mm,%20body,%202.png]] + +and 20mm total roll height, to be used with stackable bins +organizer. Rolls are mode from body and cover: + +- Body: + - [[file:roll%2027mm,%20body.png]] + +- Cover: + - [[file:roll%2027mm,%20cover.png]] + +After printing, both parts have to be glued together. This is to avoid +overhangs that are hard to print. + +* 27mm diameter roll + +[[file:roll%2027mm,%20assembled.png]] + +- [[file:roll%2027mm,%20body.stl][body STL]] +- [[file:roll%2027mm,%20cover.stl][cover STL]] +- [[file:roll%2027mm.FCStd][FreeCAD file]] + +* 55mm diameter roll + +[[file:roll%2055mm,%20assembled.png]] + +- [[file:roll%2055mm,%20body.stl][body STL]] +- [[file:roll%2055mm,%20cover.stl][cover STL]] +- [[file:roll%2055mm.FCStd][FreeCAD file]] diff --git a/organizers/roll/make.png b/organizers/roll/make.png new file mode 100644 index 0000000..66dfb6e Binary files /dev/null and b/organizers/roll/make.png differ diff --git a/organizers/shelf/index.html b/organizers/shelf/index.html new file mode 100644 index 0000000..ec452c2 --- /dev/null +++ b/organizers/shelf/index.html @@ -0,0 +1,284 @@ + + + +Tiny wall shelf + + + + + + + + + + + + + +
    +

    Tiny wall shelf

    + +
    +

    1 General

    +
    + +
    +
    + +
    +

    2 Project description

    +
    + +
    +

    make.png +

    +
    + +

    +My current printer does at most 120x120x120 (mm) prints. And I needed +a small wall shelf for my lab. Here comes design for 119x119x119 (just +in case). I used double sided tape for wall attachment. +

    + + +
    +

    shelf.png +

    +
    + + +
    +
    +
    +
    + + + diff --git a/organizers/shelf/index.org b/organizers/shelf/index.org new file mode 100644 index 0000000..50c8e49 --- /dev/null +++ b/organizers/shelf/index.org @@ -0,0 +1,42 @@ +#+TITLE: Tiny wall shelf +#+AUTHOR: Svjatoslav Agejenko +#+LANGUAGE: en + +* (document settings) :noexport: +** use dark style for TWBS-HTML exporter +#+HTML_HEAD: +#+HTML_HEAD: +#+HTML_HEAD: +#+HTML_HEAD: + +* General ++ DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE + COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE + DESIGNS AT YOUR OWN RISK. + ++ This design is released under Creative Commons Zero (CC0) license. + ++ Author: + - Svjatoslav Agejenko + - Homepage: https://svjatoslav.eu + - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +* Project description +[[file:make.png]] + +My current printer does at most 120x120x120 (mm) prints. And I needed +a small wall shelf for my lab. Here comes design for 119x119x119 (just +in case). I used double sided tape for wall attachment. + +[[file:shelf.png]] + +- Download: + - [[file:shelf.stl][Printable STL file.]] + - [[file:shelf.FCStd][Editable FreeCAD file.]] diff --git a/organizers/shelf/make.png b/organizers/shelf/make.png new file mode 100644 index 0000000..9b58c7d Binary files /dev/null and b/organizers/shelf/make.png differ