From: Svjatoslav Agejenko Date: Wed, 24 Jun 2026 21:53:57 +0000 (+0300) Subject: docs(org): collapse General and Project description into Overview X-Git-Url: http://www2.svjatoslav.eu/gitweb/?a=commitdiff_plain;h=b38f35c039a251b208c83567ced74da531ee082f;p=physical.git docs(org): collapse General and Project description into Overview Across 28 project pages, replaced the legacy two-tab structure ("* General" + "* Project description") with a single "* Overview" section so readers see all page content in one scrolling view without having to click a tab. Each affected file now has: * Overview — disclaimer at top, then project content directly * Repository — license, author, see-also, plus a "Git repository" sub-section with clone URL, snapshot, and gitweb links Old "* General" custom IDs (used as anchors by the theme) are gone; back-links in the front matter still point at the category anchors in index.html, which were not changed. --- diff --git a/Cases/Fuji XC15-45mm lens case/index.org b/Cases/Fuji XC15-45mm lens case/index.org index cad914f..4a9fc31 100644 --- a/Cases/Fuji XC15-45mm lens case/index.org +++ b/Cases/Fuji XC15-45mm lens case/index.org @@ -12,31 +12,12 @@ [[file:../../index.html#outline-container-cases-optics][Back to physical projects]] +* Overview - -* General -:PROPERTIES: -:CUSTOM_ID: fuji-xc15-45mm-lens-case-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: fuji-xc15-45mm-lens-case-project-description -:END: #+attr_html: :class responsive-img [[file:make.png]] @@ -67,3 +48,28 @@ Body: [[file:body.stl][body.stl]] Cover: [[file:cover.stl][cover.stl]] #+attr_html: :class responsive-img [[file:cover.png]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Cases/Fuji XC50-230mm lens case/index.org b/Cases/Fuji XC50-230mm lens case/index.org index 22271c0..48a9a25 100644 --- a/Cases/Fuji XC50-230mm lens case/index.org +++ b/Cases/Fuji XC50-230mm lens case/index.org @@ -12,31 +12,12 @@ [[file:../../index.html#outline-container-cases-optics][Back to physical projects]] +* Overview - -* General -:PROPERTIES: -:CUSTOM_ID: fuji-xc50-230mm-lens-case-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: fuji-xc50-230mm-lens-case-project-description -:END: #+attr_html: :class responsive-img [[file:make.png]] @@ -62,3 +43,28 @@ Body: [[file:body.stl][body.stl]] Cover: [[file:cover.stl][cover.stl]] #+attr_html: :class responsive-img [[file:cover.png]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Cases/Fujifilm camera battery box/index.org b/Cases/Fujifilm camera battery box/index.org index 077a72f..56a9df7 100644 --- a/Cases/Fujifilm camera battery box/index.org +++ b/Cases/Fujifilm camera battery box/index.org @@ -12,31 +12,12 @@ [[file:../../index.html#outline-container-cases-optics][Back to physical projects]] +* Overview - -* General -:PROPERTIES: -:CUSTOM_ID: fujifilm-camera-battery-box-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: fujifilm-camera-battery-box-project-description -:END: #+attr_html: :class responsive-img [[file:make.png]] @@ -55,3 +36,28 @@ files ready for 3D printing: + Cover: [[file:cover.stl][download STL]] + [[file:cover.png]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Cases/Meiqqm portable dosimeter case/index.org b/Cases/Meiqqm portable dosimeter case/index.org index 5a65e13..3dcfce2 100644 --- a/Cases/Meiqqm portable dosimeter case/index.org +++ b/Cases/Meiqqm portable dosimeter case/index.org @@ -14,30 +14,12 @@ -* General -:PROPERTIES: -:CUSTOM_ID: meiqqm-portable-dosimeter-case-general -:END: +* Overview + + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: meiqqm-portable-dosimeter-case-project-description -:END: - #+attr_html: :class responsive-img [[file:make.png]] @@ -58,3 +40,28 @@ Download: - [[file:Meiqqm%20portable%20dosimeter%20case.stl][STL file]] - [[file:Meiqqm%20portable%20dosimeter%20case.FCStd][FreeCAD project]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Cases/NanoVNA case/index.org b/Cases/NanoVNA case/index.org index 3b5acb8..8e40267 100644 --- a/Cases/NanoVNA case/index.org +++ b/Cases/NanoVNA case/index.org @@ -12,35 +12,15 @@ [[file:../../index.html#outline-container-measurement-device-cases][Back to physical projects]] +* Overview -* General -:PROPERTIES: -:CUSTOM_ID: nano-vna-case-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: nano-vna-case-project-description -:END: - I felt that original NanoVNA case is too fragile for carrying this device around in the bag. - #+attr_html: :class responsive-img [[file:NanoVNA, 1.png]] @@ -55,15 +35,12 @@ connectors and buttons. #+attr_html: :class responsive-img [[file:make, 3.png]] - Also originally there is no housing for calibration and adapter connectors. #+attr_html: :class responsive-img [[file:make.png]] - - Now there is also stylus / pincers help using touch screen and picking connectors from the box. @@ -85,7 +62,6 @@ CAD drawing for inner box/case: #+attr_html: :class responsive-img [[file:inner%20body%20assembled.png]] - CAD drawing for inner box/case within outer box: #+attr_html: :class responsive-img @@ -103,7 +79,6 @@ and connectors): #+attr_html: :class responsive-img [[file:NanoVNA, 2.png]] - | Width | 86.4 mm | | Height | 54.5 mm | | Thickness | 15.85 mm | @@ -163,3 +138,28 @@ Files can be edited using [[https://www.freecadweb.org/][FreeCAD]]. + [[file:NanoVNA%20case.FCStd][NanoVNA case]] + [[file:stylus.FCStd][Stylus]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Cases/Nikon COOLPIX W150 battery case/index.org b/Cases/Nikon COOLPIX W150 battery case/index.org index 75b59a7..f1dd5c7 100644 --- a/Cases/Nikon COOLPIX W150 battery case/index.org +++ b/Cases/Nikon COOLPIX W150 battery case/index.org @@ -12,31 +12,12 @@ [[file:../../index.html#outline-container-cases-optics][Back to physical projects]] +* Overview - -* General -:PROPERTIES: -:CUSTOM_ID: nikon-coolpix-w150-battery-case-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: nikon-coolpix-w150-battery-case-project-description -:END: #+attr_html: :class responsive-img [[file:make.png]] @@ -44,7 +25,6 @@ When closed: #+attr_html: :class responsive-img [[file:make, 2.png]] - Carrying case for spare Nikon COOLPIX W150 battery. Design utilizes [[https://www.amazon.de/gp/product/B00TACKU0O/][3mm x 2mm thick neodymium magnets]]. @@ -61,3 +41,28 @@ files ready for 3D printing: Schematic: #+attr_html: :class responsive-img [[file:schematic.png]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Cases/USB cable terminals/index.org b/Cases/USB cable terminals/index.org index 3950db6..fec3ee4 100644 --- a/Cases/USB cable terminals/index.org +++ b/Cases/USB cable terminals/index.org @@ -12,31 +12,12 @@ [[file:../../index.html#outline-container-cable-wire][Back to physical projects]] +* Overview - -* General -:PROPERTIES: -:CUSTOM_ID: usb-cable-terminals-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: usb-cable-terminals-project-description -:END: Original cable endings could not handle all the twisting, so why not to make new and better ones. @@ -70,7 +51,6 @@ Download: - [[file:PLA + TPU/male%20connector%20case.FCStd][FreeCAD project]] - [[file:PLA + TPU/male%20connector%20case.stl][STL file]] - ** Female connector case :PROPERTIES: :CUSTOM_ID: usb-cable-terminals-female-connector-case @@ -82,7 +62,6 @@ Download: #+attr_html: :class responsive-img [[file:PLA%20+%20TPU/female%20connector%20case,%202.png]] - Download: - [[file:PLA%20+%20TPU/female%20connector%20case.FCStd][FreeCAD project]] - [[file:PLA%20+%20TPU/female%20connector%20case.stl][STL file]] @@ -103,3 +82,28 @@ Download: Download: - [[file:TPU/USB%20cover.FCStd][FreeCAD project]] - [[file:TPU/USB%20cover.stl][STL file]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Cases/macro filter storage compartment/index.org b/Cases/macro filter storage compartment/index.org index e22307b..9faced3 100644 --- a/Cases/macro filter storage compartment/index.org +++ b/Cases/macro filter storage compartment/index.org @@ -14,30 +14,12 @@ #+author: Svjatoslav Agejenko +* Overview -* General -:PROPERTIES: -:CUSTOM_ID: macro-filter-storage-compartment-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: macro-filter-storage-compartment-project-description -:END: #+attr_html: :class responsive-img [[file:make.png]] @@ -49,7 +31,6 @@ Case for 52mm [[https://en.wikipedia.org/wiki/Close-up_lens][macro filter]]. + Cover: + [[file:cover.png]] - Download: | item | FreeCAD file | STL file | |-------+--------------+----------| @@ -58,3 +39,28 @@ Download: See also: + [[file:../Fujifilm%20camera%20battery%20box/index.html][Fujifilm camera battery box]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Cases/microscope slide box/index.org b/Cases/microscope slide box/index.org index c190a93..4973756 100644 --- a/Cases/microscope slide box/index.org +++ b/Cases/microscope slide box/index.org @@ -14,30 +14,12 @@ #+author: Svjatoslav Agejenko +* Overview -* General -:PROPERTIES: -:CUSTOM_ID: microscope-slide-box-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: microscope-slide-box-project-description -:END: #+attr_html: :class responsive-img [[file:make.png]] @@ -65,3 +47,28 @@ Download: See also: + [[file:../../Optics/Fujifilm%20X-mount%20microscope%20adapter/][Fujifilm microscope adapter]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Cases/roll/index.org b/Cases/roll/index.org index 699d086..3b1c3da 100644 --- a/Cases/roll/index.org +++ b/Cases/roll/index.org @@ -12,31 +12,12 @@ [[file:../../index.html#outline-container-cable-wire][Back to physical projects]] +* Overview - -* General -:PROPERTIES: -:CUSTOM_ID: roll-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: roll-project-description -:END: #+attr_html: :class responsive-img [[file:make.png]] @@ -66,7 +47,6 @@ overhangs that are hard to print. #+attr_html: :class responsive-img [[file:roll 27mm/roll 27mm, assembled, 2.png]] - - [[file:roll%2027mm,%20body.stl][body STL]] - [[file:roll%2027mm,%20cover.stl][cover STL]] - [[file:roll%2027mm.FCStd][FreeCAD file]] @@ -79,7 +59,31 @@ overhangs that are hard to print. #+attr_html: :class responsive-img [[file:roll 55mm/roll 55mm, assembled.png]] - - [[file:roll%2055mm,%20body.stl][body STL]] - [[file:roll%2055mm,%20cover.stl][cover STL]] - [[file:roll%2055mm.FCStd][FreeCAD file]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Furniture/Book stand/index.org b/Furniture/Book stand/index.org index 23b02b1..e5395f2 100644 --- a/Furniture/Book stand/index.org +++ b/Furniture/Book stand/index.org @@ -12,31 +12,12 @@ [[file:../../index.html#outline-container-furniture][Back to physical projects]] +* Overview - -* General -:PROPERTIES: -:CUSTOM_ID: book-stand-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: book-stand-project-description -:END: #+attr_html: :class responsive-img [[file:make.png]] @@ -48,3 +29,28 @@ Small book stand. Download: + [[file:book%20stand.stl][STL file]] + [[file:book%20stand.FCStd][FreeCAD file]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Furniture/DVD organizer/index.org b/Furniture/DVD organizer/index.org index 695665b..cdc8e8a 100644 --- a/Furniture/DVD organizer/index.org +++ b/Furniture/DVD organizer/index.org @@ -12,35 +12,16 @@ [[file:../../index.html#outline-container-furniture][Back to physical projects]] -* General -:PROPERTIES: -:CUSTOM_ID: dvd-organizer-general -:END: +* Overview + + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: dvd-organizer-project-description -:END: - This 3D printable organizer allows to neatly store DVDs. Multiple organizers can be printed and stacked horizontally, vertically or in a grid. - Photo: #+attr_html: :class responsive-img @@ -51,7 +32,31 @@ Render: #+attr_html: :class responsive-img [[file:render.png]] - Download: - [[file:DVD storage box.stl][Printable STL file]] - [[file:DVD storage box.FCStd][Editable FreeCAD file]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Furniture/Spray gun holder/index.org b/Furniture/Spray gun holder/index.org index 5c3f144..b07c4e6 100644 --- a/Furniture/Spray gun holder/index.org +++ b/Furniture/Spray gun holder/index.org @@ -12,30 +12,12 @@ [[file:../../index.html#outline-container-furniture][Back to physical projects]] +* Overview -* General -:PROPERTIES: -:CUSTOM_ID: spray-gun-holder-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: spray-gun-holder-project-description -:END: There is good [[https://www.amazon.de/-/en/gp/product/B01LCX8ISE/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1][Kkmoon HVLP Air Spray Gun]] on sale at Amazon. Here are designs for 3D printable mounts for it. @@ -54,7 +36,6 @@ Render: #+attr_html: :class responsive-img [[file:schematic.png]] - Download: - [[file:holder.stl][Printable STL file]] - [[file:holder.FCStd][Editable FreeCAD file]] @@ -71,3 +52,28 @@ Render: Download: - [[file:holder under table.stl][Printable STL file]] - [[file:holder under table.FCStd][Editable FreeCAD file]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Furniture/Wall mounted shelf/index.org b/Furniture/Wall mounted shelf/index.org index 0846c60..c550624 100644 --- a/Furniture/Wall mounted shelf/index.org +++ b/Furniture/Wall mounted shelf/index.org @@ -12,31 +12,12 @@ [[file:../../index.html#outline-container-furniture][Back to physical projects]] +* Overview - -* General -:PROPERTIES: -:CUSTOM_ID: wall-mounted-shelf-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: wall-mounted-shelf-project-description -:END: #+attr_html: :class responsive-img [[file:make.png]] @@ -50,3 +31,28 @@ in case). I used double sided tape for wall attachment. - Download: - [[file:shelf.stl][Printable STL file.]] - [[file:shelf.FCStd][Editable FreeCAD file.]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Miscellaneous/12V Lead-Acid battery changer and terminal/index.org b/Miscellaneous/12V Lead-Acid battery changer and terminal/index.org index 55652c4..0a9cc28 100644 --- a/Miscellaneous/12V Lead-Acid battery changer and terminal/index.org +++ b/Miscellaneous/12V Lead-Acid battery changer and terminal/index.org @@ -12,33 +12,12 @@ [[file:../../index.html#outline-container-miscellaneous][Back to physical projects]] +* Overview - -* General -:PROPERTIES: -:CUSTOM_ID: lead-acid-battery-charger-and-terminal-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Authors: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - - - Valeria Agejenko - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: lead-acid-battery-charger-and-terminal-project-description -:END: I needed dual voltage power supply for my lab that runs on mains electricity (wall power) and slowly charges (use-changing) attached 12V Lead-Acid battery. Lead-acid battery in turn provides high current @@ -252,7 +231,6 @@ Electrically schematic is realized using smaller prototype PCBs. #+attr_html: :class responsive-img [[file:connector%20terminal/make,%201.png]] - Those PCBs are wired to central small PCB that acts as a hub: #+attr_html: :class responsive-img @@ -273,7 +251,6 @@ Result: #+attr_html: :class responsive-img [[file:connector%20terminal/make,%203.png]] - Download: + [[file:connector%20terminal/front%20panel.stl][front panel STL]] + [[file:connector%20terminal/back%20panel.stl][back panel STL]] @@ -294,3 +271,28 @@ See here for more details: https://www.powerstream.com/SLA.htm ----- Happy building! :) + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Miscellaneous/USB desk fan mod/index.org b/Miscellaneous/USB desk fan mod/index.org index b7dc726..1191b24 100644 --- a/Miscellaneous/USB desk fan mod/index.org +++ b/Miscellaneous/USB desk fan mod/index.org @@ -14,32 +14,12 @@ #+author: Svjatoslav Agejenko +* Overview -* General -:PROPERTIES: -:CUSTOM_ID: usb-desk-fan-mod-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Authors: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - - - Valeria Agejenko - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: usb-desk-fan-mod-project-description -:END: End-result looks like this: #+attr_html: :class responsive-img @@ -87,7 +67,6 @@ And result is encased into pipelike case: #+attr_html: :class responsive-img [[file:fan%20housing%20-%20cover%20assembly.png]] - Download: + STL: [[file:fan%20housing%20-%20fan%20mount.stl][fan mount back plate]] + STL: [[file:fan%20housing%20-%20cover.stl][pipe-like case]] @@ -132,3 +111,28 @@ deform easily. Will never buy it again. Fan top and bottom halves are attached using [[https://www.amazon.de/gp/product/B00OOLKD2G/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1][camera tripod quick release screw]]. + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Miscellaneous/adjustable resistor/index.org b/Miscellaneous/adjustable resistor/index.org index 33bbe33..72c6be6 100644 --- a/Miscellaneous/adjustable resistor/index.org +++ b/Miscellaneous/adjustable resistor/index.org @@ -12,31 +12,12 @@ [[file:../../index.html#outline-container-miscellaneous][Back to physical projects]] +* Overview - -* General -:PROPERTIES: -:CUSTOM_ID: adjustable-resistor-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: adjustable-resistor-project-description -:END: I needed a way to experimentally find resistance that works best in certain circuits. Usual potentiometers could not handle required power dissipation and were not precise enough. @@ -74,12 +55,10 @@ Download: + [[file:indicator%20panel.FCStd][FreeCAD project]] + [[file:indicator%20panel.stl][STL file]] - After assembly using prototype PCB: #+attr_html: :class responsive-img [[file:make,%202.png]] - Following body is used as a case and PCB support: #+attr_html: :class responsive-img [[file:body.png]] @@ -105,3 +84,28 @@ Button covers: Download: + [[file:button.FCStd][FreeCAD project]] + [[file:button.stl][STL file]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Miscellaneous/alternative USB layout/index.org b/Miscellaneous/alternative USB layout/index.org index a164925..c8a927d 100644 --- a/Miscellaneous/alternative USB layout/index.org +++ b/Miscellaneous/alternative USB layout/index.org @@ -14,38 +14,16 @@ #+author: Svjatoslav Agejenko +* Overview -* General -:PROPERTIES: -:CUSTOM_ID: alternative-usb-layout-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Authors: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - - - Valeria Agejenko - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: alternative-usb-layout-project-description -:END: - *Warning!* Here I describe a hack that I personally found useful for my own needs. But it is dangerous. Not to be replicated unless you know that you are doing. - #+attr_html: :class responsive-img [[file:make.png]] @@ -85,9 +63,33 @@ Alternative wiring schematic: - 1 pin is for limited power +5V. - 1 pin for 1-Wire data. - Example warning marking on device to indicate that alternative USB layout is used here: #+attr_html: :class responsive-img [[file:../lab%20heater%20and%20cooler/make,%202.png]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Miscellaneous/battery tester/index.org b/Miscellaneous/battery tester/index.org index c7f1bfe..2accd75 100644 --- a/Miscellaneous/battery tester/index.org +++ b/Miscellaneous/battery tester/index.org @@ -12,31 +12,12 @@ [[file:../../index.html#outline-container-miscellaneous][Back to physical projects]] +* Overview - -* General -:PROPERTIES: -:CUSTOM_ID: battery-tester-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: battery-tester-project-description -:END: #+attr_html: :class responsive-img [[file:make.png]] @@ -75,3 +56,28 @@ is being quickly depleted during measurement. + PS: While this device is interesting to build, still you can just use ordinary ammeter that can handle battery generated current. + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Miscellaneous/cable organizer/index.org b/Miscellaneous/cable organizer/index.org index 2f2c83b..edd9892 100644 --- a/Miscellaneous/cable organizer/index.org +++ b/Miscellaneous/cable organizer/index.org @@ -12,31 +12,12 @@ [[file:../../index.html#outline-container-cable-wire][Back to physical projects]] +* Overview - -* General -:PROPERTIES: -:CUSTOM_ID: cable-organizer-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: cable-organizer-project-description -:END: #+attr_html: :class responsive-img [[file:make.png]] @@ -55,3 +36,28 @@ You can [[file:body.FCStd][download FreeCAD project]] file to tweak design or ge file ready for 3D printing: + [[file:body.stl]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Miscellaneous/headphone hub/index.org b/Miscellaneous/headphone hub/index.org index 95eb25e..14488b3 100644 --- a/Miscellaneous/headphone hub/index.org +++ b/Miscellaneous/headphone hub/index.org @@ -12,31 +12,12 @@ [[file:../../index.html#outline-container-audio][Back to physical projects]] +* Overview - -* General -:PROPERTIES: -:CUSTOM_ID: headphone-hub-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: headphone-hub-project-description -:END: Simple hub that allows connecting up to 4 devices via headphone jack. For example single laptop or mp3 player can power up to 3 headphones. @@ -68,15 +49,37 @@ screw at the center: - [[file:hub.FCStd][FreeCAD project]] - Body [[file:body.stl][STL file]] #+attr_html: :class responsive-img [[file:body.png]] - - ----- Cover [[file:cover.stl][STL file]] #+attr_html: :class responsive-img [[file:cover.png]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Miscellaneous/hook/index.org b/Miscellaneous/hook/index.org index 734901a..ada319f 100644 --- a/Miscellaneous/hook/index.org +++ b/Miscellaneous/hook/index.org @@ -12,31 +12,12 @@ [[file:../../index.html#outline-container-cable-wire][Back to physical projects]] +* Overview - -* General -:PROPERTIES: -:CUSTOM_ID: hook-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: hook-project-description -:END: #+attr_html: :class responsive-img [[file:make.png]] @@ -54,3 +35,28 @@ You can [[file:hook.FCStd][download FreeCAD project]] file to tweak design or ge file ready for 3D printing: + [[file:hook.stl]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Miscellaneous/portable stereo active speaker/index.org b/Miscellaneous/portable stereo active speaker/index.org index 4bb2967..b5f4564 100644 --- a/Miscellaneous/portable stereo active speaker/index.org +++ b/Miscellaneous/portable stereo active speaker/index.org @@ -12,31 +12,12 @@ [[file:../../index.html#outline-container-audio][Back to physical projects]] +* Overview - -* General -:PROPERTIES: -:CUSTOM_ID: portable-stereo-active-speaker-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: portable-stereo-active-speaker-project-description -:END: I had pair of good compact stereo speakers lying uselessly around as well as secondhand TDA2030 Chinese knockoff audio amplifier chips. Also I wanted to test modular construction approach: motherboard with @@ -320,7 +301,6 @@ Photo of initial PSU + audio amp test: #+attr_html: :class responsive-img [[file:initial%20test.png]] - Improvement ideas: + Instead of using undersized heatsinks on the audio amplifiers and @@ -341,3 +321,28 @@ Improvement ideas: construction body. + Screw holes are too close to the edges on the front panel. + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Miscellaneous/round pincers/index.org b/Miscellaneous/round pincers/index.org index d87b98e..87e588f 100644 --- a/Miscellaneous/round pincers/index.org +++ b/Miscellaneous/round pincers/index.org @@ -12,31 +12,12 @@ [[file:../../index.html#outline-container-miscellaneous][Back to physical projects]] +* Overview - -* General -:PROPERTIES: -:CUSTOM_ID: round-pincers-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: round-pincers-project-description -:END: Pincers allow to push LEGO EV3 rounded pins in and also pull them out. #+attr_html: :class responsive-img @@ -62,3 +43,28 @@ out and connected at the end with glue and screw. - [[file:round pincers.FCStd][FreeCAD project]] - [[file:round pincers.stl][STL file]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Miscellaneous/window fixator/index.org b/Miscellaneous/window fixator/index.org index 0492d9c..76c3036 100644 --- a/Miscellaneous/window fixator/index.org +++ b/Miscellaneous/window fixator/index.org @@ -12,33 +12,12 @@ [[file:../../index.html#outline-container-miscellaneous][Back to physical projects]] +* Overview - -* General -:PROPERTIES: -:CUSTOM_ID: window-fixator-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Authors: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - - - Valeria Agejenko - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: window-fixator-project-description -:END: #+attr_html: :class responsive-img [[file:make.png]] @@ -50,3 +29,28 @@ Keeps window open so that strong wind will not slam it close. Download: + [[file:window%20fixator.stl][STL file]] + [[file:window%20fixator.FCStd][FreeCAD file]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Optics/35mm film copying device/index.org b/Optics/35mm film copying device/index.org index 43b4b92..918769e 100644 --- a/Optics/35mm film copying device/index.org +++ b/Optics/35mm film copying device/index.org @@ -13,29 +13,12 @@ [[file:../../index.html#outline-container-optics][Back to physical projects]] -* General -:PROPERTIES: -:CUSTOM_ID: 35mm-film-copying-device-general -:END: +* Overview + + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: 35mm-film-copying-device-project-description -:END: #+attr_html: :class responsive-img [[file:make.png]] @@ -48,11 +31,9 @@ Device consists of 3 parts: + body: [[file:body.stl][download STL]] + [[file:body.png]] - + cover: [[file:cover.stl][download STL]] + [[file:cover.png]] - + bottom stand: [[file:bottom.stl][download STL]] + [[file:bottom.png]] @@ -60,7 +41,6 @@ Body and cover are pushed together using 2 rubber bands on the sides. Bottom rectangular stand is attached to body via screw on the bottom. - FreeCAD files: + [[file:body%20and%20cover.FCStd][body and cover]] + [[file:bottom.FCStd][bottom]] @@ -73,3 +53,28 @@ Example photo photographed from film: )}}} (click on image for full resolution version) + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Optics/Fujifilm X-mount microscope adapter/index.org b/Optics/Fujifilm X-mount microscope adapter/index.org index 45d61a0..c290558 100644 --- a/Optics/Fujifilm X-mount microscope adapter/index.org +++ b/Optics/Fujifilm X-mount microscope adapter/index.org @@ -12,31 +12,12 @@ [[file:../../index.html#outline-container-optics][Back to physical projects]] +* Overview - -* General -:PROPERTIES: -:CUSTOM_ID: fujifilm-x-mount-microscope-adapter-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: fujifilm-x-mount-microscope-adapter-project-description -:END: #+attr_html: :class responsive-img [[file:make.png]]hh @@ -79,6 +60,30 @@ choosing "SHOOT WITHOT LENS" option within camera settings menu. #+attr_html: :class responsive-img [[file:shoot without lens.png]] - See also: + [[file:../microscope%20slide%20box/index.html][Case for microscope slides and cover slips]] + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git diff --git a/Optics/gyro for binoculars/index.org b/Optics/gyro for binoculars/index.org index ddcdf9a..bec093a 100644 --- a/Optics/gyro for binoculars/index.org +++ b/Optics/gyro for binoculars/index.org @@ -12,31 +12,12 @@ [[file:../../index.html#outline-container-optics][Back to physical projects]] +* Overview - -* General -:PROPERTIES: -:CUSTOM_ID: gyro-for-binoculars-general -:END: + DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE DESIGNS AT YOUR OWN RISK. -+ This design is released under Creative Commons Zero (CC0) license. - -+ Author: - - Svjatoslav Agejenko - - Homepage: https://svjatoslav.eu - - Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] - -+ See also: - - [[../../index.html][Other physical projects in this repository]] - - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] - -* Project description -:PROPERTIES: -:CUSTOM_ID: gyro-for-binoculars-project-description -:END: #+attr_html: :class responsive-img [[file:make.png]] @@ -47,11 +28,9 @@ Tripod is not convenient to carry around. Here is an attempt to design portable gyro stabilizer that has camera tripod interface. Therefore cameras and binoculars can be mounted. - #+attr_html: :class responsive-img [[file:make,%202.png]] - Old computer hard disk platters are used as rotating discs. They are attached to following disk mount: @@ -116,7 +95,6 @@ on top of the cover: Download: - [[file:binocular%20mount.stl][Printable STL file]] - Result: #+attr_html: :class responsive-img @@ -137,3 +115,28 @@ CD/DVD disks. Unfortunately symmetry is not perfect and small high frequency vibration is added because of that. + +* Repository + ++ Designs in this repository are released under Creative Commons Zero + (CC0) license. + ++ Author: + + Svjatoslav Agejenko + + Homepage: https://svjatoslav.eu + + Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]] + ++ See also: + - [[file:../../index.html][Other physical projects in this repository]] + - [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]] + +** Git repository +:PROPERTIES: +:CUSTOM_ID: git-repository +:END: +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=snapshot;h=HEAD;sf=tgz][Download latest snapshot in TAR GZ format]] + +- [[https://www2.svjatoslav.eu/gitweb/?p=physical.git;a=summary][Browse Git repository online]] + +- Clone Git repository using command: + : git clone https://www2.svjatoslav.eu/git/physical.git