#+TITLE: 27mm and 55mm rolls
#+AUTHOR: Svjatoslav Agejenko
#+LANGUAGE: en
* (document settings) :noexport:
** use dark style for TWBS-HTML exporter
#+HTML_HEAD:
#+HTML_HEAD:
#+HTML_HEAD:
#+HTML_HEAD:
* General
+ DISCLAIMER: I DO ELECTRONICS AND 3D DESIGN SOLELY AS A HOBBY. THERE
COULD BE ERRORS THAT CAN RESULT IN ALL KINDS OF DAMAGE. USE THESE
DESIGNS AT YOUR OWN RISK.
+ This design is released under Creative Commons Zero (CC0) license.
+ Author:
- Svjatoslav Agejenko
- Homepage: https://svjatoslav.eu
- Email: [[mailto://svjatoslav@svjatoslav.eu][svjatoslav@svjatoslav.eu]]
+ See also:
- [[../../index.html][Other physical projects in this repository]]
- [[https://www.svjatoslav.eu/projects/][Other projects hosted at svjatoslav.eu]]
* Project description
[[file:make.png]]
I am a big fan of [[https://www.thingiverse.com/thing:2471753][stackable bins organizer]]. I find 2x2 bins with 21mm
height are particularly good for storing rolls of wire. Also electric
handheld screwdriver is good for twisting wire onto the
roll. Therefore I designed rolls that have standard hexagonal hole on
the bottom (for screwdriver compatibility):
[[file:roll 27mm/roll 27mm, body, 2.png]]
and 20mm total roll height, to be used with stackable bins
organizer. Rolls are made from body and cover:
After printing, both parts have to be glued together. This is to avoid
overhangs that are hard to print.
* 27mm diameter roll
[[file:roll 27mm/roll 27mm, assembled.png]]
[[file:roll 27mm/roll 27mm, assembled, 2.png]]
- [[file:roll%2027mm,%20body.stl][body STL]]
- [[file:roll%2027mm,%20cover.stl][cover STL]]
- [[file:roll%2027mm.FCStd][FreeCAD file]]
* 55mm diameter roll
[[file:roll 55mm/roll 55mm, assembled.png]]
- [[file:roll%2055mm,%20body.stl][body STL]]
- [[file:roll%2055mm,%20cover.stl][cover STL]]
- [[file:roll%2055mm.FCStd][FreeCAD file]]